TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 365 of 623
REMOVAL - Continued
NOTE
Perform Steps (8) and (9) for vehicles without PTO.
8.
Remove three screws (Figure 4, Item 1), lockwashers (Figure 4, Item 8), and cover (Figure 4, Item 2) from
mounting plate (Figure 4, Item 3) and cab floor (Figure 4, Item 4).
9.
Install three screws (Figure 4, Item 1) on mounting plate (Figure 4, Item 3) and cab floor (Figure 4, Item 4) to
hold pneumatic controller (Figure 4, Item 5) in place.
10.
Disconnect wire (Figure 4, Item 7) from pressure transducer (Figure 4, Item 6).
11.
Remove pressure transducer (Figure 4, Item 6) from pneumatic controller (Figure 4, Item 5).
M6329DAA
1
8
7
6
2
3
4
5
Figure 4.
Pressure Transducer Removal.
END OF TASK
TM 9-2320-272-23-5
0812
0812-4
Back to Top
