TM-9-2320-272-23-5
TRUCK, 5-TON, 6X6, M939, M939A1, AND M939A2 SERIES TRUCKS (DIESEL)
TECHNICAL MANUAL; FIELD MAINTENANCE MANUAL; VOLUME 5 OF 5
SEPTEMBER 2012
TM-9-2320-272-23-5 - Page 364 of 623
REMOVAL - Continued
6.
Remove three screws (Figure 3, Item 2), lockwashers (Figure 3, Item 1), and PTO control panel assembly
(Figure 3, Item 3) from mounting plate (Figure 3, Item 4) and cab floor (Figure 3, Item 5). Discard lockwashers.
7.
Install three screws (Figure 3, Item 2) on mounting plate (Figure 3, Item 4) and cab floor (Figure 3, Item 5) to
hold pneumatic controller (Figure 3, Item 6) in place.
M10252DAA
2
1
3
7
6
4
6
5
Figure 3.
Pressure Transducer Removal.
TM 9-2320-272-23-5
0812
0812-3
Back to Top
