TM9-2320-273-34
(3) Remove the eight brushes (fig. 5-44). Do not
brush spring is exerting pressure on the brush.
lift the brushes by their pigtails while the
Figure 5-44. Brushes Removal.
TA 074039
(4) Remove six screws from the nose housing and slide the housing from the armature shaft
(fig. 5-45).
TA 074040
Figure 5-45. Nose dousing Removal.
(5) Remove the five screws from the shift housing (fig. 5-46) and slide the complete assembly
(arm assembly, shaft assembly, drive assembly, and housing) from the armature shaft.
5-34