TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 154 of 801

TM9-2320-273-34

TA 074030

Figure 5-33. Regulator Electrical Connections.

(15)

Position the regulator, being careful that the red and black leads are routed through their

slots in the regulator housing without binding. Loosely install the four mounting screws, withdraw the

brushes retaining pin, and tighten the mounting screws.

(16) Install the diode trio lead and nut.

Do not force or pound pulley on shaft.

(17)

Install the spacer, key, fan, pulley, and nut. Torque the nut to 70-80 lb-ft (95-108 N-m).

NOTE

Due to the design of the alternator, a small

amount of shaft end play will be present in

new or rebuilt units. End play between 0.004

and 0.012 in. (0.10-0.30 mm) is normal.

5-26

CAUTIO N