TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 172 of 801

TM9-2320-273-34

LEGEND:

1.

CROSSOVER TUBE

2. CLAMP (2)

3. CLAMP

4.

AIR INLET LINE

5. NUTS (4)

6. CLIP (2)

7. WASHERS (4)

8. DRAIN LINE

16. GASKET

9. OIL SUPPLY LINE

17. ETHER ATOMIZER LINE

10. CLAMP

18. WASHER (4)

11. CLAMP

19. CAPSCREW (4)

12. OUTLET TUBE

20. WASHER (2)

13. GASKET

21. NUT (2)

14. STUDS (4)

22. BOOT

15. TURBOCHARGER

Figure 6-1. Remove/Install Turbocharger.

(7)

Place a rag under turbocharger fittings for lines (8) and (9) to catch oil leakage.

In step (8), put a plug in the end of each

oil line as soon as you disconnect it. This

keeps oil from spilling out and keeps dirt

out of oil system.

TA 074048

(8) Disconnect lines (8) and (9) from turbocharger ( 15); then plug both lines.

(9) Loosen, but do not remove, two nuts (21) to loosen clamp (10).

6-2

CAUTIO N