TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 541 of 801

TM 9-2320-273-34

(4)

If necessary to replace rear thrust bearing or radial bearing, remove with suitable puller

(fig. 12-25).

Figure 12-25 Press Bearing Cage from Pinion Shaft.

(5)

Remove oil seal assembly from bearing cover.

12-15. Cleaning, Inspection, and Repair. (Refer to para 11-6, 11-7, and 11-8.)

12-16. Differential Carrier Assembly.

CAUTIO N

The pinion gear and ring gear are a matched

set and have common identification num-

bers etched on each. Before assembly, check

numbers.

a. Reassemble the Pinion and Cage Assembly.

(1)

If new cups are to be installed, press firmly against pinion bearing cage shoulders.

(2)

Lubricate bearings and cups with gear lube (item 30, App B).

12-31