TM-9-2330-202-13-P

TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3

TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

DECEMBER 2011

TM-9-2330-202-13-P - Page 259 of 552

REAR TUBE ASSEMBLY REMOVAL

1.

Remove two screws (Figure 2, Item 8) from two loop clamps (Figure 2, Item 7) along curbside frame

(Figure 2, Item 6).

2.

Disconnect rear tube assembly (Figure 2, Item 2) from coupling (Figure 2, Item 5).

3.

On the M101A2 and M116A2, remove self-locking nut (Figure 2, Item 3) and screw (Figure 2, Item 11) from

loop clamp (Figure 2, Item 4) along crossmember. Disconnect rear tube assembly (Figure 2, Item 2 ) from hose

assembly (Figure 2, Item 10) and remove. Discard self-locking nut (Figure 2, Item 3).

4.

On the M101A3 and M116A3, remove rear tube assembly (Figure 2, Item 13) from hose assembly

(Figure 2, Item 10) at retaining ring (Figure 2, Item 9).

5.

On the M101A2 and M116A2, remove two loop clamps (Figure 2, Item 7) and loop clamp (Figure 2, Item 4)

from rear tube assembly (Figure 2, Item 2).

7

8

11

M101A2 and M116A2

M101A3 and M116A3

1

1

1

1

2

3

4

5

6

9

10

M116_M101_4-77

Figure 2.

Rear Tube Assembly Removal.

END OF TASK

TM 9-2330-202-13&P

0052

0052-3