TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 331 of 1348

STEP 2

Does test equipment pass offset test?

WARNING

Be sure to wear the proper eye protection when working on or around pressurized air systems

if not injury or death could result.

1.

Have assistant turn engine start switch to OFF. Refer to vehicle Operator's manual (WP

0190).

2.

Drain trailer air system. Refer to TM 9-2330-342-10 (WP

0190).

3.

Disconnect air hose 2620 from multifunction valve.

4.

Connect TK pressure transducer (blue stripe) to air hose 2620.

MULTIFUNCTION

VALVE

FRONT END

AIR LINE 2620

TRANSDUCER

Figure 2.

Multifunction Valve and Air Line 2620.

5.

Connect TK pressure test cable to MSD/ICE test equipment (WP

0004) and to TK pressure transducer (blue

stripe).

6.

Perform ICE Offset Test 50.

CONDITION/INDICATION

Does test equipment pass offset test?

DECISION

Yes - Go to (Step 3 - Does parking brake valve supply 125 ± 5 psi (861 ± 34 kPa) through hose 2620?).

No - Test equipment failed offset. Contact your Supervisor.

STEP 3

Does parking brake valve supply 125 ± 5 psi (861 ± 34 kPa) through hose 2620?

1.

Have assistant turn engine start switch to ON. Refer to vehicle Operator's manual (WP

0190).

2.

Perform ICE Test 50.

3.

While assistant pushes in trailer charge valve in vehicle, observe meter reading. Refer to vehicle Operator's

manual (WP

0190).

TM 9-2330-342-23&P

0031

0031-3