TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 375 of 528

TM 9-2330-356-14

7-28. Fuel Injectors (Fig. 7-23)

CAUTION

All injector openings and nozzles must be

capped when the injector is removed from

the engine to prevent contamination.

NOTE

To remove injectors behind air intake man-

ifold, remove air intake manifold (para 4-82).

a

Remove fuel lines (3 and 7, fig. 7-15) at fuel

injectors.

b.

Remove screws (1, fig. 7-23), washers (2), and

retaining flange (3).

c.

Remove fuel injector (4), gasket (5), adapter (6),

gasket (7), and heat shield (8) as an assembly, and remove

gasket (9). Separate fuel injector (4) from other parts by

pressing it out.

Figure 7-23. Fuel Injector Removal.

7-19