TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 644 of 783

TM 9-2350-260-20-1-3

ROADWHEEL SUPPORT HOUSING ASSEMBLY REPAIR AND REPLACEMENT (Sheet 1 of 2)

TOOLS: 1-5/16 in. socket with 3/4 in. drive

10 in. adjustable wrench

Ratchet with 3/4 in. drive

Slip joint pliers

Hammer

Torque wrench with 3/4 in. drive (0-600 lb-ft)

36 in. extension bar

(0-814 N

•

m)

Drift pin punch

SUPPLIES: Gasket (10911460)

Grease (Item 37, Appendix D)

Sealing compound (Item 25, Appendix D)

Lockwashers (MS35340-52)(9 required)

PERSONNEL: Two

PRELIMINARY PROCEDURES: Remove roadwheel arm (page 14-2)

Remove torsion bar anchor (page 14-31)

NOTE

There are six support housings on

each side of tank.

The procedures

for all six are identical except that no.

1 housing is not interchangeable.

NOTE

Use jack to support housing during

removal and installation.

REMOVAL:

1.

Using socket with ratchet, remove nine screws (A) and lockwashers (B) securing roadwheel support housing (C) to

hull.

Throw lockwashers (B) away.

2.

Remove housing (C) and gasket (D) from hull mounting place.

Throw gasket (D) away.

Go on to Sheet 2

TA147823

14-22