TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

  TM-9-2350-260-20-1-3 - Page 653 of 783

TM 9-2350-260-20-1-3
TORSION BAR ANCHOR REPLACEMENT (Sheet 1 of 3)
TOOLS: 3/4 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Putty knife
Extractor tool set
Portable drill and drill set
Crowbar
Pry bar
SUPPLIES: Gasket (7014010)
Pins (141238)(2 required)
Lockwashers (MS35340-48)(4 required)
PRELIMINARY PROCEDURE:
Remove torsion bar from exact opposite side of tank
(page 14-24)
REMOVAL:
1.
Using socket, remove four screws (A) and
lockwashers (B) securing cover (C) to roadwheel
housing (D).
Throw lockwashers (B) away.
2.
Using pry bar, pry cover (C) free from housing (D).
3.
Remove cover (C), gasket (E), and anchor (F) as
assembly from housing (D).
Throw gasket (E) away.
Go on to Sheet 2
TA147832
14-31


Back to Top