TM 9-2350-260-20-1-3
TRACK SUPPORT ROLLER REPLACEMENT (Sheet 2 of 11)
REMOVAL:
1.
Remove two track centerguides (TM 9-2350-260-10) just in front of support roller to be removed.
2.
Have second person start engine (TM 9-2350-260-10).
3.
Have second person drive tank slowly until area where centerguides were removed is over track support roller.
4.
Have second person stop tank and shut engine off (TM 9-2350-260-10).
5.
Apply parking brake (TM 9-2350-260-10).
6.
Loosen track tension (TM 9-2350-260-10).
Go on to Sheet 3
TA147836
14-35