TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 658 of 783

TM 9-2350-260-20-1-3

TRACK SUPPORT ROLLER REPLACEMENT (Sheet 3 of 11)

NOTE

If plank or base plate is not available, position jack on roadwheel near roller and

raise track.

NOTE

If hydraulic jack is not available, disconnect track (TM 9-2350-260-10).

Then move

tank in reverse until track is off roller.

7.

Using wooden plank or metal plate as base on

roadwheel, position hydraulic jack.

8.

Using jack, raise track so it clears roller.

NOTE

Safety block must be installed as

shown.

9.

Using 9/16 inch socket, remove six screws (A),

lockwashers (B), and flat washers (C) securing

access cover plate (D) and gasket (E).

Throw

lockwashers (B) and gasket (E) away.

Go on to Sheet 4

TA147837

14-36