TM 9-2350-260-20-1-3
TORSION BAR ANCHOR REPLACEMENT (Sheet 3 of 3)
3.
Position anchor (D) onto cover (B) so that two pins
(A) fit into holes in anchor.
4.
Lift cover (B) and anchor (D) as assembly.
Mount in
roadwheel housing (E) opening.
5.
Install four new lockwashers (F) and screws (G) to
secure cover (B) to housing (E).
6.
Using socket wrench, tighten four screws (G).
7.
There are 12 anchors and covers.
Install as many
as necessary to repair suspension system.
8.
Install torsion bar at opposite side of tank
(page 14-27).
End of Task
TA147834
14-33