TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 647 of 783

TM 9-2350-260-20-1-3

SUSPENSION TORSION BAR REPLACEMENT (Sheet 2 of 7)

2.

Install special wrench (Item 26, Chapter 3, Section I)

into end plug (C).

NOTE

It may be necessary to use 6 inch bar

extension.

3.

Using adjustable wrench or special wrench, loosen

end plug (C).

4.

Remove end plug (C) and spacer (D).

5.

Have second person start engine.

Then shift

transmission into reverse and slowly back tank up.

6.

Direct second person to stop tank when support arm

(F) is in down position.

7.

Using mallet, tap special roadwheel lifter off spindle

stub.

Remove lifter.

Go on to Sheet 3

TA147826

14-25