TM 9-2350-311-20-1
8-30 BILGE PUMP RELAY
This task covers:
a. Removal
b. Installation
Tool s
Materials/Parts
General mechanic’s tool kit (item 64, Appx H)
External-tooth Iockwashers (4) (item 75, Appx G)
Lockwashers (2) (item 95, Appx G)
a. Removal
1
2
3
4
Ensure MASTER switch is OFF when working on bilge pump relay to avoid electrical
shock and burns.
Disconnect electrical connector (1).
Remove and save two nuts (2), two Iockwashers (3), four external-tooth
and two screws (6).
Remove bilge pump relay (7).
Replace two nuts (2), two Iockwashers (3), four external-too
screws (6) to hold starter relay (8).
th
Iockwashers (4), two flat washers (5),
Iockwashers (4), two flat washers (5), and two
8-81
WARNING