TM-9-2350-311-34-2
CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-2 - Page 251 of 552
TM 9-2350-311-34-2
5-14 ACTUATOR AND FOLLOWER ASSEMBLIES
This task covers:
a. Removal
b. Inspection
c. Installation
d. Adjustment
INITIAL SETUP
Tools
Lockwire (item 36, Appx E)
Artillery and turret mechanic ’s tool kit
Self-locking nut (item 41, Appx E)
(SC 5180-95-CL-A12)
Equipment Condition
Materials/Parts
Adhesive (item 4, Appx B)
Lockwasher (item 72, Appx E)
Lockwashers (4) (item 86, Appx E)
Cab weather cover removed (TM 9-2350-311-20-2)
Upper gun rotor removed (para 5-1)
Dust shield and cover removed (TM 9-2350-311-20-2)
Cannon at 0 mils
a. Removal
NOTE
l
Actuator and follower procedures can be performed while mount and cannon are installed in
vehicle.
l
A maximum of four flat washers may be used per cap screw.
1
Remove self-locking nut (1), flat washer (2), eye bolt (3), and helical spring (4). Discard self-locking nut.
2
Remove lockwire (5), four cap screws (6), washers (7) if present, follower assembly (8), and shim pack (9) if
present, from upper left front of trunnion bracket (10). Discard lockwire.
Change 2 5-107
Back to Top
