TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 417 of 933

TM 9-2520-270-34

OBTAIN DIMENSION G.

a. Measure distance between bevel gear (1)

and fixture (2).

b. This distance is dimension G.

IF DIMENSION G IS EQUAL TO

DIMENSION F, ± 0.001 INCH

(0.03 mm), GO TO STEP 75. IF NOT,

GO TO STEP 72.

70.

71.

WARNING

Input bevel assembly is heavy

and awkward. Remove slowly

or input bevel assembly can

fall and injure you.

72. ROTATE TRANSMISSION SO TOP

SIDE IS UP.

73. REMOVE INPUT BEVEL

ASSEMBLY (3).

a. Remove eight screws (4) and

washers (5).

b. Using both hands, grasp assembly (3)

and pull straight out.

c. Remove shim(s) (6).

74. GO TO STEP 54.

GO TO NEXT PAGE

4-109