TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 555 of 933

TM 9-2520-270-34

CAUTION

Do not force spindle assembly into brake.

Metal seal ring can be damaged.

54. INSTALL SPINDLE ASSEMBLY (1).

a. Center ring (2) on spindle

assembly (1).

b. Insert spindle assembly (1) into

brake (3).

c. Aline screw holes in spindle plate (4)

with screw holes in brake (3).

55. SECURE SPINDLE ASSEMBLY (1).

a. Install two spacers (5) in two holes

in spindle plate (4).

b. Install two washers (6) and

screws (7) and tighten evenly.

56. USING 1/2-lNCH DRIVE TORQUE

WRENCH, TORQUE TWO SCREWS (7)

TO 10-12 ft-lb (1-2 mkg).

STEP DELETED.

4-232

Change 3