TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 561 of 933

TM 9-2520-270-34

NOTE

Minor heat cracks on thrust washer are normal

and are not considered as damage.

6.1 CHECK GEAR (1).

a. Using indicator caliper, measure

outside diameter of inner hub (2).

b. Replace gear (1) if measurement is

less than 4.3287 inches (109.949 mm).

c. Inspect thrust washer (3). Replace

gear (1) if washer is damaged.

6.3 DELETE D

4-238

Change 4

6.2 DELETED

6.4

REMOVE CLUTCH DISK (5) FROM SPUR

GEARSHAFT (6).