TM 9-2520-270-34
REPAIR LEFT-HAND INTERMEDIATE HOUSING ASSEMBLY
This task covers: Disassemble (page 4-236). Assemble (page 4-248).
INITIAL SETUP
Tools:
Arbor press – (Item 3, App C)
Bearing installer — (Item 6, App C)
Bearing installer — (Item 7, App C)
Bearing installer — (Item 8, App C)
Bearing installer — (Item 10, App C)
Bearing installer- (Item 14A, App C)
General mechanic’s tool kit:
automotive – (Item 33, App C)
Inserted hammer face holder —
(Item 39A, App C)
Inserted hammer face – (Item 39B, App C)
Inserted hammer face – (Item 39C, App C)
Inside/outside indicator caliper —
(Item 41, App C)
Mechanical puller kit — (Item 49, App C)
Micrometer caliper set — (Item 52, App C)
Micrometer depth gage — (Item 54, App C)
Retaining-ring pliers — (Item 59, App C)
Retaining-ring pliers — (Item 61, App C)
Socket wrench attachment —
(Item 79, App C)
Socket wrench attachment —
(Item 81, App C)
Socket wrench set – (Item 87, App C)
Socket wrench set – (Item 89, App C)
Tools: (cont)
Telescoping gage set — (Item 93, App C)
Torque wrench — (Item 99, App C)
Torque wrench — (Item 100, App C)
Materials/Parts:
Engine oil – (Item 12, App B)
Wood blocks (2) — (Item 3, App D)
Disk brake parts kit
Preformed packing (2)
Preformed packing (2)
Oil lube gasket
Personnel Required:
Track Veh Rep 63H10
Helper (H)
References:
TM 9-214
Equipment Conditions:
Left-hand intermediate housing assembly
on workbench. See page 4-220.
DISASSEMBL E
1.
2.
REMOVE LEFT-HAND SINGLE DISK
BRAKE. See task REPLACE LEFT-HAND
SINGLE DISK BRAKE, page 4-255.
REMOVE SPUR GEAR (1).
a. Lift off gear (1).
4-236
Change 4