TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 550 of 933

TM 9-2520-270-34

32. INSTALL SPUR GEARSHAFT (1)

IF REMOVED.

a. Aline gear teeth (2) of spur gear-

shaft (1) with teeth on differential

carrier assembly (3).

b. Install spur gearshaft (1).

WARNING

Solvent fumes can burn and

could poison you. Read warn-

ing in the front of this

manual.

34. CLEAN GASKET MOUNTING SUR-

FACE (8) ON MAIN HOUSING (9).

a. Use wiping rag dampened with

cleaning solvent.

35. INSTALL NEW GASKET (10).

a.

b.

Apply petrolatum to gasket mounting

surface (8) on main housing (9).

Install new gasket (10) on main

housing (9).

33. INSTALL POSITIVE CLUTCH (4)

IF REMOVED.

a. Turn clutch (4) until planetary

gears (5) mesh with ring gear (6) and

spur gear (7). Clutch will slide into

place.

GO TO NEXT PAGE

4-227