TM-9-2520-270-34

HYDROMECHANICAL CROSSDRIVE, TRANSMISSION HMPT 500 AND TRANSMISSlON CONTAINER ASSEMBLY

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE

NOVEMBER 1984

TM-9-2520-270-34 - Page 554 of 933

TM 9-2520-270-34

48. SECURE HOUSING ASSEMBLY (1).

a. Install five new lock washers (2)

and 1 1/2-inch screws (3).

b. Install new lock washer (4) and

1 3/4-inch screw (5).

51. IF RING (9) WAS REMOVED, GO TO

STEP 52. IF NOT, GO TO STEP 53.

52. INSTALL NEW RING (9).

a.

b.

c.

Coat new ring (9) with petrolatum.

Install ring (9) on spindle

assembly (10).

Hook ring (9) by squeezing together

with fingers.

49. INSTALL LIFTING EYE (6).

a. Install two new lock washers (7)

and 2-inch screws (8).

50. USING 1/2-lNCH DRIVE TORQUE

WRENCH WITH ADAPTER AND

5/8-lNCH CROWFOOT, TORQUE

EIGHT SCREWS (3), (5), AND (8)

TO 40-45 ft-lb (6 mkg).

53.

INSTALL TWO NEW PREFORMED

PACKINGS (11).

a. Coat two new preformed packings (11)

with transmission oil.

b. Install two new packings (11) on

spindle assembly (10).

GO TO NEXT PAGE

Change 1

4-231