TM-9-2815-205-24
6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE
FEBRUARY 2013
TM-9-2815-205-24 - Page 451 of 856
DISASSEMBLY - Continued
b.
Loosen locknut (Figure 2, Item 29) and adjusting screw (Figure 2, Item 30) from control lever
(Figure 2, Item 11).
c.
Disconnect yield spring (Figure 2, Items 27 or 28) from each control lever (Figure 2, Item 11). Roll
yield springs out of slots and notches of control tube (Figure 2, Items 25 or 12).
d.
Disconnect return spring (Figure 2, Item 26) from bracket (Figure 2, Item 13) and control lever
(Figure 2, Item 11) at rear of left control tube (Figure 2, Item 25) or from bracket (Figure 2, Item 6) and
control lever at front of right control tube (Figure 2, Item 12).
e.
For right control tube assembly, remove bracket (Figure 2, Item 6) from front of tube.
f.
Slide three control levers (Figure 2, Item 11), two yield springs (Figure 2, Item 27), yield spring
(Figure 2, Item 28), and return spring (Figure 2, Item 26) off front of control tube
(Figure 2, Items 25 and 12).
2.
Throttle delay assembly
a.
Remove two locknuts (Figure 2, Item 14), two bushings (Figure 2, Item 15), two screws
(Figure 2, Item 23), and link (Figure 2, Item 16) from bracket (Figure 2, Item 21). Discard nuts.
b.
If necessary, remove locknut (Figure 2, Item 22) and machine screw (Figure 2, Item 24) from bracket
(Figure 2, Item 21). Discard nut.
c.
Remove locknut (Figure 2, Item 20) and link (Figure 2, Item 16) from joint (Figure 2, Item 19).
Discard nut.
d.
Remove locknut (Figure 2, Item 17) and joint (Figure 2, Item 19) from piston (Figure 2, Item 18).
Discard nut.
LEFT
FRONT SIDE
12
13
17
20
15
14
26
25
16
27
28
29
6
24
30
6
21
22
RIGHT
FRONT
SIDE
THROTTLE DELAY
ASSEMBLY
15
14
13
27
23
26
11
27
28
11
11
27
29
30
29
30
11
11
11
29
30
30
30
29
29
18
19
MAINT_197
Figure 2.
Injector Control Tube Disassembly.
END OF TASK
TM 9-2815-205-24
0072
0072-3
Back to Top
