TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 60 of 968
TM 9-2815-210-34-2-2
FRAME 24
1.
Check that outside diameter measurements for seven main bearing journals
(1 through 7)
4-6.
2.
If any outside
(1 through 7)
(8) .
GO TO FRAME 25
noted in step 3 of frame 20 are within limits given in table
diameter measurements for seven main
is not within limits given in table 4-6,
bearing journals
get a new crankshaft
Table 4-6.
0.0200-Inch Undersize Crankshaft Main Bearing Journals Wear Limits
Index
Number
Item /Point of Measurement
1
Main bearing journals out-
through
side diameter
Size and Fit
of New Parts
(inches)
3.6010 to 3.6020
Wear Limit
(inches)
3.5990
7
4-41
Back to Top
