TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 65 of 968

TM 9-2815-210-34-2-2
FRAME 2 9
1.
Check that outside diameter measurements for six connecting rod journals
(1 through 6) noted in step 5 of frame 25 are within limits given in table 4-9.
2.
If any outside diameter measurements for six connecting rod journals
(1 through 6) is not within limits given in table 4-9, get a new crankshaft
(7) .
GO TO FRAME 30
Table 4-9.
0.0200-Inch Undersize Crankshaft Connecting Rod Journals Wear Limits
Size and Fit
Index
of New Parts
Wear Limit
Number
Item/Point of Measurement
(inches)
(inches)
1
Connecting rod journal
through
out side diameter
2.9770 to 2.9780
2.9750
6
4-46


Back to Top