TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 64 of 968
TM 9-2815-210-34-2-2
FRAME 28
1.
Check that outside diameter measurements for six, connecting rod journals
(1 through 6) noted in step 5 of frame 25 are within limits given in table
4-8.
2.
If any outside diameter measurements for six connecting rod journals
(1 through 6) is not within limits given in table 4-8, get a new crankshaft
(7) .
GO TO FRAME 30
Table 4-8. 0.0100-Inch Undersize Crankshaft Connecting Rod Journals Wear Limits
Size and Fit
Index
of New Parts
Wear Limit
Number
Item/Point of Measurement
(inches)
(inches)
2
Connecting rod journal out-
through
side diameter
2.9870 to 2.9880
2.9850
6
4-45
Back to Top
