TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 59 of 968
TM 9-2815-210-34-2-2
FRAME 2 3
1.
Check that outside diameter measurements for seven main bearing journals
(1 through 7) noted in step 3 of frame 20 are within limits given in table
4-5.
2.
If any outside diameter measurements for seven main bearing journals
(1 through 7) is not within limits given in table 4-5, get a new crankshaft
(8) .
GO TO FRAME 25
Table 4-5.
0.0100-Inch Undersize Crankshaft Main Bearing Journals Wear Limits
Index
Number
1
through
7
4-40
Item /Point of Measurement
Main bearing journals out-
side diameter
Size and Fit
of New Parts
(inches)
3.6110 to 3.6120
Wear Limits
(inches)
3.6090
Back to Top
