TM-9-2815-210-34-2-2
ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER
TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2
APRIL 1981
TM-9-2815-210-34-2-2 - Page 63 of 968
TM 9-2815-210-34-2-2
FRAME 27
1.
Check that outside diameter measurements for six connecting rod journals
(1 through 6) noted in step 5 of frame 25 are within limits given in table
4-7.
2.
If any outside diameter measurements for six connecting rod journals
(1 through 6) is not within limits given in table 4-7, get a new crankshaft
(7) .
GO TO FRAME 30
Table 4-7. Standard Size Crankshaft Connecting Rod Journals Wear Limits
Index
Number
1
through
6
Item/Point of Measurement
Concocting rod journal
outside diameter
Late model
• Early model
Size and Fit
of New Parts
Wear Limits
(inches)
(inches)
2.9970 to 2.9980
2.9950
2.9960 to 2.9970
2.9950
4-44
Back to Top
