TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 635 of 968

TM 9-2815-210-34-2-2

5-4. CAMSHAFT ASSEMBLY, CAMSHAFT REAR BEARING PLUG AND PISTON

COOLING NOZZLES.

a. Camshaft Assembly .

FRAME 1

1.

Coat 12 lobes (1) of camshaft (2) with anti-scuff lubricant.

2.

Push camshaft (2) in crankcase (3).

3.

Put camshaft thrust plate (4) over camshaft end (5) and on crankcase (3).

4.

Put in and tighten two capscrews (6) with lockwashers (7).

END OF TASK

5-6