TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 644 of 968

TM 9-2815-210-34-2-2

FRAME 7

1.

Coat all mating surfaces of rear main bearing cap (1) with oil.

2.

Coat both sides of lower rear main bearing half (2) with oil.

3.

Put bearing half (2) in bearing cap (1).

NOTE

Be careful when putting in rear main bearing cap (1)

so seals (4) are not damaged.

4.

Put rear bearing cap (1) in place in cylinder block (3).

GO TO FRAME 8

5-15