TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 643 of 968

TM 9-2815-210-34-2-2

FRAME 6

1.

2.

3.

4.

5.

Coat bottom surface of left rear main bearing cap oil seal tab (1) with

cement. Let cement set for three minutes.

Coat rear main bearing cap oil seal tab left side mating surface (2) with

cement.

Let cement set for three minutes.

Put left rear main bearing cap seal (3) in rear main bearing cap (4) with

seal tab (1) flush with bearing cap top.

Do steps 1 through 3 again for right rear main bearing cap oil seal (5).

Let cement dry for five minutes before putting in rear main bearing cap (4).

GO TO FRAME 7

5-14