TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 636 of 968

TM 9-2815-210-34-2-2

b .

Camshaft Rear Bearing Plug.

FRAME 1

1.

Coat edge of rear bearing plug (1) with sealant.

NOTE

After putting in plug (1), do not bump camshaft.

Bumping could unseat plug and cause an oil leak.

2.

Put plug (1) in crankcase (2). Using hammer, tap center of plug to seat plug.

END OF TASK

5-7