TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

TM-9-2815-210-34-2-2 - Page 645 of 968

TM 9-2815-210-34-2-2

FRAME

8

1.

Check that oil seals (1) are flush with top of bearing cap (2) to with in 0.0625

inch.

2.

Put in two capscrews with washers (3).

Tighten capscrews to 80 to 90

pound-feet.

3.

Tighten capscrews (3) to 115 to 120 pound-feet.

4.

Using protrusion gage (4), check alinement of main bearing cap (2). Aline-

ment must be within 0.002 inch.

GO TO FRAME 9

5-16