TM-9-2815-210-34-2-2

ENGINE ASSEMBLY, DIESEL (MULTIFUEL): NATURALLY ASPIRATED OR TURBOCHARGED, FUEL-INJECTED, WATER-COOLED, 6-CYLINDER

TECHNICAL MANUAL; TROUBLESHOOTING; DIRECT SUPPORT AND GENERAL SUPPORT LEVEL; VOLUME 2 OF 2; PART 2 OF 2

APRIL 1981

  TM-9-2815-210-34-2-2 - Page 637 of 968

TM 9-2815-210-34-2-2
c .
Piston Cooling Nozzles.
FRAME 1
1.
2.
NOTE
Piston cooling nozzles (1) must be put on the same cylin-
der (2) they were taken from.
Cylinders are named by numbers one through six, count-
ing from front to rear of crankcase. Each piston cooling
nozzle (1) is tagged with the number of cylinder (2) it
was taken from.
Put piston cooling nozzle (1) on cylinder block (2) at each of six cylinders
(3) as tagged. Take off tags.
Put on and tighten six self-locking bolts (4).
END OF TASK
5-8


Back to Top