TM-9-2815-213-34
ENGINE, DIESEL, WITH ACCESSORIES CUMMINS MODEL V8-300 (2815-910-8217)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING DIRECT SUPPORT AND GENERAL SUPPORT REPAIR PARTS LIST AND DEPOT MAINTENANCE ALLOWANCES)
FEBRUARY 1972
TM-9-2815-213-34 - Page 25 of 192
*TM 9-2815-213-34
Figure 2-15. Rocker arms and push rods--removal/installation.
Figure 2-16. Injector clamps--removal/installation.
the holes and secure into the adapter. These shall serve
as a support for removal of the flywheel.
(4) Remove two of the slotted head screws and
install 1/2-13 x 2 1/2, inch capscrews.
(5) Remove the four remaining flywheel to adapter
securing capscrews.
(6) Alternately turn-in the 1/2-inch cap
screws to pull flywheel from adapter onto the six-inch
studs.
(7) Remove the flywheel by sliding over studs.
Remove studs.
i.
Crankshaft Adapter
(fig. 2-22).
(1) Remove grease retainer cup from adapter base.
Figure 2-17. Fuel Injector and hold-down clamp.
2-10
Back to Top
