*TM 9-2815-213-34
Figure 2-21.
Flywheel-removal/installation.
(1)
Remove carbon and wear ridges at of
cylinder to facilitate piston removal.
(2)
Straighten tangs of lockplates on two bolts
and nuts securing rod to crankshaft.
(3)
Remove nuts and lockplates. Discard
lockplates.
(4)
Using a rubber mallet or brass driver,
tap
rod bearing cap to free cap from crankshaft
Figure 2-22.
Crankshaft adapter-removal/installation.
2-12