TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 150 of 266
TM 9–1200–215–34&P
5–12
5–15.
CCA MAINTENANCE INSTRUCTIONS CONTINUED
b.
INSTALLATION
CAUTION
ESD SENSITIVE
The VMS Modem contains ESD
sensitive components.
Wear a
protective ESD wrist strap whenever
handling components.
Failure to
comply may result in damage to
equipment.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Position modem CCA (3) in VMS Modem
housing (7).
3.
Install five screws (5) and five washers (6)
through modem CCA (3) to model housing (7).
Torque screws to 9.5 + .5 in.–lb (1.1 + .1 N
S
m).
4.
Connect cable connector P4 (4) to receptacle
J4 (2).
5.
Torque two captive screws (1) on connector P4
to 3 + .2 in.–lb (.34 + .02 N
S
m).
6.
Install cover onto VMS modem housing in
accordance with procedure outlined in
paragraph 5–13.
1
2
4
3
5
6
7
Back to Top
