TM-9-1200-215-34-P
AUTOMATIC FIRE CONTROL SYSTEM (AFCS)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
FEBRUARY 1999
TM-9-1200-215-34-P - Page 152 of 266
TM 9–1200–215–34&P
5–14
5–16.
HEATSINK ASSEMBLY MAINTENANCE INSTRUCTIONS CONTINUED
b.
INSTALLATION
CAUTION
ESD SENSITIVE
The VMS Modem contains ESD
sensitive components.
Wear a
protective ESD wrist strap whenever
handling components.
Failure to
comply may result in damage to
equipment.
1.
Attach ESD grounding strap to wrist and
ground to ensure ESD protection.
2.
Position heatsink assembly (3) in VMS Modem
housing (7).
3.
Install six screws (5) and six washers (6)
through heatsink assembly (3) to housing (7).
Torque screws to 9.5+ .5 in.–lb (1.1+ .1 N
S
m).
4.
Position cable connector P3 (4) onto
receptacles J3 (2) and tighten screws (1).
5.
Torque connector screws (1) to 3+ .2 in.–lb
(0.34 + .02 N
S
m).
6.
Install modem CCA IAW procedure outlined in
paragraph 5–15.
5
6
4
7
1
2
3
Back to Top
