TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 454 of 801

TM 9-2320-273-34

Do not use pry bars, chisels or wedges to

loosen the cover. This will damage the

cover and carrier flange mating surfaces.

(5)

Separate the gear cover from the carrier by attaching a chain fall to the input yoke (fig. 11-5).

It may be necessary to use a rawhide mallet to break the cover from the carrier.

b.

Figure 11-5. Remove Helical Gear Cover Assembly.

(6)

After separating the parts, remove the cover-to-carrier gasket or gasket materiel and discard.

Remove Oil Filter and Pump.

NOTE

There may be approximately one pint of

lubricant remaining within the filter. Be

careful not to spill it when removing the

filter.

11-8

CAUTION