TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 462 of 801

TM 9-2320-273-34

(2)

Rotate the carrier 180° and bring the drive gear to an upright position.

(3)

Check and record the backlash. This information will be needed in reassembly unless a new

gear set is used.

(4)

Center punch one differential carrier leg and bearing cap to identify for reassembly.

(5)

Remove the carrier cap capscrews, washers, and cotter keys from both sides of the carrier.

(6)

Remove the bearing adjusting rings and the carrier caps.

(7)

Lift out the differential and gear assembly.

g. Disassemble Differential Case and Gear.

(1)

If original identification marks are not clear, mark the differential case halves with a punch

or chisel for correct alinement on reassembly (fig. 11-16).

Figure 11-16. Differential Case and Gear.

11-16