TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 470 of 801

TM 9-2320-273-34

(10)

Employing a small mechanical press, place the driver, wear sleeve and yoke into the press

(fig. 11-21).

Figure 11-21. Install the Wear Sleeve.

(11)

(fig. 1 1-22).

Activate the press, forcing the driver

to push the wear sleeve onto the yoke until it

bottoms

Figure 11-22. Sleeve Positioning.

(12)

When removing the driver, pull the driver straight off. Do not work the driver in a circular

or alternately back-and-forth motion, as this may damage the wear sleeve surface.

(13)

Examine the wear sleeve after installation for nicks or burrs that may cut or wear the seal.

These may be removed by careful filing.

11-9. Differential Carrier Assembly.

Pinion gear and ring gear are a matched

set and have a common number etched on

each. Before assembly, check numbers.

11-24

CAUTION