TM-9-2320-273-34

TRUCK TRACTOR, LINE HAUL; LIGHT EQUIPMENT TRANSPORTER; TRUCK CHASSIS; MEDIUM EQUIPMENT TRANSPORTER

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

DECEMBER 1980

TM-9-2320-273-34 - Page 469 of 801

TM 9-2320-273-34

new wear

(7)

G

sleeve i

rease the o-ring inside the tool with bearing grease (item 1, App B) to

nto the tool (fig. 11-20).

Figure 11-20. Mount the Wear Sleeve in the Driver.

facilitate

(8)

Position the driver and wear sleeve into the tool cavity, tapered end first.

(9)

Place the driver and wear sleeve squarely against the hub end of the yoke.

Do not install the wear sleeve by striking

the driver, as this practice may cause

excessive expansion of the wear sleeve

and will permit the sleeve to rotate on the

yoke.

sliding

11-23

CAUTION