TM 9-2320-273-34
Minor concentrations of acetic acid vapor
may be produced during application.
Adequate ventilation should be provided
when silicone is applied in confined areas.
Further, eye contact may cause irritation;
if eye contact takes place, flush eyes with
water for 15 minutes and have eyes
examined by a doctor.
(d)) Assemble the components immediate/y to permit silastic to spread evenly.
c. Wear Sleeve Replacement.
(1) Place the yoke on its side in a vise,
Do not completely split or penetrate the
wear sleeve and damage the yoke.
(2) Using a cold chisel, notch the wear sleeve slightly to expand the sleeve and permit its
removal from the yoke (fig. 1
Figure 11-18. Loosen Wear Sleeve.
11-21
WARNING
CAUTION
1-18).