TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 135 of 1008

TM 9-2350-261-20-2

REPLACE MASTER SWITCH PANEL ASSEMBLY (EARLY SLAVE RECEPTACLE)

(ALL EXCEPT M577A2) — Continued

0223 00

INSTALLATION

1.

Install two new grommets (17) in master switch panel assembly (16).

2.

Install circuit 49 lead (8) and circuit 6 lead (4) through two grommets (17) into master switch panel (16).

NOTE

For all carriers with 200 amp generator, do Step 3.

3.

Install circuit 2A lead (14) on master switch terminal (15). Secure with new lockwasher (13) and nut (12).

4.

Install circuit 6 lead (8), circuit 2 lead (9), and circuit 400 lead (10) on bus bar (11). Secure with screw (7) and new

locknut (6).

5.

Install circuit 49 lead (4) on auxiliary power receptacle lead (5). Secure with screw (2), nut (1), and two new lockwashers

(3).

NOTE

Check gasket on master switch panel flange for cracks or other damage. Replace gasket

if damaged.

6.

Install master switch panel (1) on distribution box (2). Secure with eight screws (3), washers (4), and new locknuts (5).

022300-3