TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 894 of 1047
TM 9-2350-277-20-5
REPAIR/REPLACE DRIVER’S DISPLAY EXTERIOR MOUNTING
BALL (MFCS) (M1064A3 ONLY)
0812 11
THIS WORK PACKAGE COVERS:
Removal (page 0812 11-1).
Repair (page 0812 11-1).
Installation (page 0812 11-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
Electronic Equipment Tool Kit (WP 0926 00, Item 66)
Shop Set, Small Arms (WP 0926 00, Item 46.1)
Materials/Parts
Self-locking nut (4)
Personnel Required
Unit Mechanic
References
TM 9-1220-248-23&P
TM 9-2350-277-24P
REMOVAL
1.
Remove four self-locking nuts (4) and countersunk screws (1) from mounting ball (2). Discard self-locking nuts.
2.
Remove mounting ball (2) from angle bracket (3) on hull.
REPAIR
1.
Replace defective parts as authorized by TM 9-1220-248-23&P and TM 9-2350-277-24P.
081211-1
Change 4
Back to Top
