TM 9–2350–311–20–2
14–16
14–4 BUMPER ASSEMBLY, SIDE DOORS
This task covers:
a.
Removal
b.
Disassembly
c.
Assembly
d.
Installation
INITIAL SETUP
Tools
Artillery and turret mechanic’s tool kit
(SC 5180–95–CL–A12)
Materials/Parts
Cotter pin (item 38, Appx G)
Lockwashers (2) (item 81, Appx G)
Shims (V) (item 147, Appx G)
Shims (V) (item 148, Appx G)
Shims (V) (item 149, Appx G)
Shims (V) (item 150, Appx G)
NOTE
This procedure is written for the left door bumper assembly, but also applies to the right door bumper
assembly.
a.
Removal
Remove two cap screws (1), two lockwashers (2), bumper assembly (3), and shim(s) (4) from cab. Discard
lockwashers and shims.
b.
Disassembly
Remove cotter pin (5), headed straight pin (6), and bumper (7) from bumper assembly (3). Discard cotter
pin.
c.
Assembly
Install bumper (7), headed straight pin (6), and new cotter pin (5).
d.
Installation
Install new shim(s) (4), as required, and bumper assembly (3) on cab using two cap screws (1) and two new
lockwashers (2).
4
3
2
1
7
5
6
3