TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 320 of 779

b. Cleaning, Inspection, and Repair .

(1) Refer to paragraphs 6-2 through 6-4 .

(2) Inspect starter driven gearshaft, oil seal,

and bearings against limits specified in overhau l

standards (table 6-4). Replace parts not meeting

hese requirements .

(3) Minor damage incurred to the leadin g

edge of the starter drive gear may be repaired by

regrinding the leading surface to dimension s

shown in figur e

6-21. Regrind gear toot h

chamfer to original configuration after rework of

starter drive leading face.

Figure 6-21. Starter drive gear-rework .

6-26