TM-9-2815-200-35

ENGINE, WITH CONTAINER:TURBOSUPERCHARGED, DIESEL ,FUEL INJECTION ,90-DEGREE “V” TYPE, AIR - COOLED ,12 - CYLINDER , ASSEMBLY ;MODELS AVDS-1790-2M (2815-856-4996), AVDS-1790-2A AND AVDS-1790-2AM (2815-856-9005)

TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS

TM-9-2815-200-35 - Page 322 of 779

6-12. Overhaul of Generator Drive

a. Disassembly.

Disassemble generator driv e

gearshaft and adapter following instruction s

accompanying figures 6-24 and 6-25 .

1. Coat new oil seal with engine oil, Military

Specification MIL-L-45199. Position seal on bore of

bearing cage with lip of seal toward ball bearing seat.

2. Carefully press oil seal into cage until seal is tight

against seal seat flange.

3. Press starter driven gearshaft in the bearing cage.

Figure 6-23. Pressing oil seal into

bearing cage .

Figure 6-24. Removing generator adapte r

oil seal .

6-28