TM-9-2815-205-24

6V53/6V53T ENGINES, DIESEL WITH CONTAINERS; MODEL 5063-5299, MODEL 5063-5392, MODEL 5063-5393 AND MODEL 5063-539L

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE

FEBRUARY 2013

TM-9-2815-205-24 - Page 566 of 856

CLEANING - Continued

4.

Injector plunger and bushing:

WARNING

Cleaning solvent is TOXIC and flammable. Wear protective goggles and

gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and

clothes; and do not breathe vapors. Keep away from heat or flame. Never

smoke when using cleaning solvent. Failure to comply may result in injury,

illness, or death to personnel.

Compressed air used for cleaning purposes will not exceed 30 PSI (207 kPa).

Use only with protective equipment (goggles, face shield, gloves, etc.). Failure

to comply may result in injury to personnel.

CAUTION

Ensure high pressure bleed hole in side of bushing is not plugged. If hole is plugged,

fuel oil will leak into engine and cause oil dilution.

NOTE

Keep plunger and bushing together as a matched set. Keep parts of each injector

assembly together.

Wash plunger and bushing with cleaning solvent and dry with compressed air.

END OF TASK

TM 9-2815-205-24

0084

0084-6